Wolkenkraft Accessories: What You Really Need – and What’s Optional!
Brand Guide · Wolkenkraft Accessories & Spare Parts
Wolkenkraft Accessories Guide: everything explained for ViTA, FX Mini, ÄRiS & LIVE
With Wolkenkraft, it’s often not the device but a €5 part that decides a good session: a clogged screen, a tired seal, a resin-coated mouthpiece. In this guide, we cover the complete Wolkenkraft accessories – sorted by device, with a picture for each part so you immediately see what it is. For each accessory, we explain what it does, how to use it, and when it’s worth it.
The principle upfront: Wear parts (screens, seals, filters) wear out over time – this is normal and not a defect. Comfort accessories (dosing capsules, bubblers, glass mouthpieces) are not essential but can noticeably change the experience. We tell you our assessment for each part.
Must, should, can: the three accessory categories
Before you buy anything, this classification helps. It applies to every Wolkenkraft model and saves you from bad purchases:
1. Wear Parts
Screens, sealing rings, filters. These parts sit in the vapor path, get hot, and accumulate resin. They will eventually degrade – this is not a defect but normal wear. Those who refresh them in time get more lasting enjoyment from their device.
2. Maintenance Tools
Cleaning brushes, multi-tools, airway tools. Buy once, use for years. What’s tedious gets done less often – with the right tools, maintenance takes just seconds.
3. Comfort & Upgrades
Dosing capsules, bubblers, glass mouthpieces, bags, dust covers. Not absolutely necessary – but dosing capsules really save time on the go, and a bubbler noticeably changes the draw experience. Here, just decide how you use your device.
Our advice for new buyers: We recommend having a small stock of screens and seals from the start. These parts are inexpensive and will be needed sooner or later – and it’s frustrating when the last screen clogs up in the middle of the week.
Important to know: not every Wolkenkraft device charges the same way
One detail that regularly causes trouble when buying replacement charging cables: not all models have the same port. FX Mini and ÄRiS charge via Micro-USB, while FX Mini Ultra, ViTA, and LIVE use USB-C.
So if you need a replacement cable or are upgrading from an older to a newer model, it's worth taking a quick look at the charging port. A USB-C cable simply won't fit into a Micro-USB port – and vice versa.
1) Accessories for the Wolkenkraft ViTA
The Wolkenkraft ViTA is the brand’s entry-level device – simply designed, five temperature levels, little technology to break. Accordingly, the accessories are manageable: three parts you should know.
ViTA Mouthpiece Screens
Wear part
Function
Fine metal screen in the mouthpiece. It holds back plant particles that would otherwise enter the airway and reach the mouth while inhaling.
Replace
When the draw becomes noticeably harder, even though the chamber is freshly filled. Typically every few weeks with daily use.
Usage
Remove the old screen from the mouthpiece, insert a new one. Soak in isopropyl alcohol occasionally and reuse – but eventually, the mesh loses its shape.
Our tip
We find it sensible to have a spare screen at home. It costs little – and without a spare, you might vape for weeks against a clogged screen and think the device is broken.
ViTA Ceramic Filter
Wear part
Function
Sits in the vapor path and filters fine particles before they reach the mouthpiece. Ceramic is flavor-neutral and withstands high temperatures.
Replace
When the taste becomes dull – even if you just cleaned the chamber and mouthpiece. This is the typical filter symptom.
Usage
Remove, tap out, soak in isopropyl alcohol if heavily soiled, and let dry completely. Only replace when this no longer helps.
Our tip
From our experience, the filter is the most common reason for bad taste with the ViTA – and the least suspected. Having a spare in the cupboard saves long troubleshooting.
ViTA Mouthpiece Set
Comfort & upgrade
Function
The complete mouthpiece area as a unit: mouthpiece base, mouthpiece, ceramic filter, and screen. Everything that sits between the chamber and your lips.
When useful
As a replacement in case of loss or breakage – or if the mouthpiece can no longer be cleaned properly after long use. Also practical as a second set so you can clean one while still vaping.
Advantage
You renew carriers and wear parts all at once, instead of buying filters and screens individually.
Our recommendation for the ViTA setup:
Screens and ceramic filters as a small stock cover everything that wears out. A replacement mouthpiece is only needed if lost or broken.
Screens and ceramic filters as a small stock cover everything that wears out. A replacement mouthpiece is only needed if lost or broken.
2) Accessories for FX Mini & FX Mini Ultra
The FX Mini and the FX Mini Ultra share almost all accessories – with one important exception that many overlook: The sealing rings are not identical.
Sealing ring FX Mini
Wear part · model-specific
Important
Only for the FX Mini – the Ultra needs a different ring. Check which model you have before ordering.
Function
It is a sealing ring with screen: the ring seals the transition to the mouthpiece, the screen holds back particles. Two functions in one component.
Replace
If the vapor seems thin even though everything is technically fine. The cause is usually a porous or warped ring that lets in air leaks – the air takes the easier path past the material.
Usage
Remove the old ring, put on the new one, and press evenly all around so it sits flush. If it sits crooked, it won’t seal.
Our tip
Rubber hardens and becomes brittle over time due to heat – this happens gradually, so it is often noticed late. Having a replacement ring on hand is, in our view, a good investment.
Sealing ring FX Mini Ultra
Wear part · model-specific
Important
Only for the FX Mini Ultra – a different item than for the regular FX Mini. They are not interchangeable.
Function
Also a sealing ring with screen: tight fit on the mouthpiece plus particle filter in one part.
Replace
Same symptoms as with the FX Mini: thin vapor due to air leaks or a stiff draw due to a clogged screen.
Our tip
A replacement ring costs little and immediately restores the device to normal – we recommend having one in stock.
Mouthpiece screens (ÄRiS & FX Mini)
Wear part
Function
The standard screen in the mouthpiece of both series. It keeps plant residue out of the airflow and ensures you can draw freely.
Fits for
ÄRiS, ÄRiS Ultra, FX Mini, and FX Mini Ultra. If you use two of these devices, you only need one type of screen.
Replace
As soon as the draw becomes tighter. Cleaning extends the lifespan but does not permanently replace them – resin buildup eventually cannot be removed.
Our tip
They come in different quantities (packs of 3, 5, 10). We recommend the larger pack – you will need the screens anyway, so you always have one ready.
FX Mini (Ultra) glass mouthpiece
Comfort & upgrade
Function
Mouthpiece made of borosilicate glass instead of plastic. The vapor only touches glass in the last section – it is flavor-neutral and does not absorb aromas.
Why it’s worth it
The most noticeable affordable upgrade for anyone who cares about flavor. Plastic can impart a slight taste at higher temperatures, glass does not.
Disadvantage
Glass is fragile. So be careful with it in your pocket – or combine it with a dust cap and case.
Care
Very easy to care for: soak in isopropyl alcohol, rinse, let dry. Residue comes off glass easier than plastic.
Bubbler for FX Mini (Ultra)
Comfort & upgrade
Function
Attachment made of borosilicate glass that passes the vapor through water. This cools it down and filters out some particles.
Why it’s worth it
If the vapor often feels too hot or harsh. Water cooling makes higher temperatures pleasant – and that’s where the more intense flavors are.
Usage
Fill only enough water to just cover the intake opening. Too much water causes you to draw water along with the vapor.
Care
Change the water after every longer session. Stale water ruins the taste faster than most expect.
Don’t confuse
There are also bubbler adapters (10″, 14″, 18″). They do something different: They let you connect the Vaporizer to existing glass like a bong instead of using a dedicated attachment.
Dosing Capsules (ÄRiS & FX Mini)
Comfort & upgrade
Function
Small stainless steel capsules that you pre-fill and insert completely into the chamber. The material stays in the capsule instead of loose in the chamber.
Why it’s worth it
Prepare three or four capsules at home and simply swap them on the go – no case, no grinder, no crumbs in your bag. Side effect: The chamber stays much cleaner, so you need to clean it less often.
Usage
Fill the capsule loosely, don’t pack it tight – too densely packed material slows the airflow. Insert, vape normally, then remove and tap out.
Variants
Available in packs of 3, 5, and 10 as well as in two versions: for herbs and for extracts. Make sure to order the ones you need.
Dosing Capsule Container
Comfort & upgrade
Function
Transport container for pre-filled dosing capsules. Keeps them closed, organized, and low-odor together.
Why it’s worth it
Without a container, the capsules move loose through your bag or backpack, open, and lose their contents. The container turns the capsule idea into a practical everyday solution.
Sizes
For 2 or 5 capsules and in matching colors. How many you need depends on how long you typically are on the go.
FX Mini Mouthpiece Set
Comfort & upgrade
Function
The complete mouthpiece assembly as a unit – base plus the associated wear parts.
When useful
As a replacement in case of loss or damage, or if the old mouthpiece no longer cleans properly after long use. A second set is also practical if you have one in cleaning.
Alternative
If only the flavor suffers, you don’t need the set – usually a fresh sieve or a glass mouthpiece is enough.
FX Mini (Ultra) dust cap
Comfort & upgrade
Function
Silicone cap that seals the mouthpiece during transport.
Why it’s worth it
Sounds like a small thing, but it’s practical: lint, dust, and crumbs collect in jacket and pants pockets – and otherwise end up directly in the vapor path. The cap keeps the path clean and the mouthpiece hygienic.
As a replacement
Caps are usually the easiest to lose. That’s why they mostly come in sets of 3 – a spare costs almost nothing and is ready when needed.
Our recommendation for the FX Mini setup:
As a base: sieves and the sealing ring matching your model.
Worth it: glass mouthpiece for flavor, dosing capsules if you are often on the go.
For home use: a bubbler.
As a base: sieves and the sealing ring matching your model.
Worth it: glass mouthpiece for flavor, dosing capsules if you are often on the go.
For home use: a bubbler.
3) Accessories for ÄRiS & ÄRiS Ultra
The ÄRiS and the ÄRiS Ultra use exactly the same accessories – so you don’t have to distinguish between models here. The special feature of this series is the spiral sieve in the air channel, which is unique among Wolkenkraft devices.
ÄRiS (Ultra) spiral sieve
Wear part
Function
The correct name for the part is spiral sieve insert. It sits in the air channel – so not in the mouthpiece, but deeper inside the device – and significantly controls the airflow there.
Replace
When the draw becomes difficult and a fresh mouthpiece sieve hasn’t helped. Then the problem is one level deeper.
Usage
Cannot be removed with fingers – you need the air channel tool for that (see below). Brush out, soak in iso-alcohol if necessary, let dry completely, then reinsert precisely.
Our tip
The air channel is the place in the ÄRiS where residues stick most stubbornly. A spare insert in the cabinet saves the question of whether the old part is still good enough.
ÄRiS (Ultra) air channel tool
Tools & Care
Function
This is how you loosen and fix the spiral sieve insert in the air channel. Without the tool, you practically cannot reach this part.
Special feature
It is not just a cleaning aid, but also a lid and thus firmly integrated into the device concept. Not an optional extra, but a component that belongs to the ÄRiS.
When useful
As a replacement in case of loss – and that happens quite often because the part is small and easily set aside and forgotten during cleaning. Without it, you can no longer properly maintain the air channel.
Practical tip
Store together with the spare spiral screen. That way, both are in one place when you open the air channel next time.
ÄRiS (Ultra) sealing rings with screen
Wear part
Function
Combines two wear parts in one component: The sealing ring ensures a tight fit, the screen traps particles.
Replace
For two very different symptoms – when the device draws harder (screen clogged) or when the vapor seems thin (seal tired, air leak). Both are solved by the same part.
Usage
Remove carefully, insert the new part evenly. Make sure the ring sits cleanly all around – even a slight tilt lets air pass by.
Our tip
Because two wear mechanisms come together here, this part wears out fastest on the ÄRiS. We therefore recommend always having a spare on hand.
ÄRiS (Ultra) cleaning brushes
Tools & Care
Function
There are deliberately two designs: a long, thin air channel brush (reaches the channel) and a shorter, wider filling chamber brush (for the chamber walls).
Why two
The two areas get dirty in completely different ways. Loose plant residues sit in the chamber, sticky resin builds up in the air channel – different bristles and lengths are needed for each.
Routine
After every second or third session, briefly brush out the chamber while the device is still warm to the touch. Residues come off much more easily than when cold.
Why important
Regular brushing noticeably extends the lifespan of screens and seals – so you replace wear parts less often.
ÄRiS (Ultra) glass mouthpiece
Comfort & upgrade
Function
Mouthpiece made of glass instead of plastic. The vapor only touches neutral-tasting material on the last stretch.
Why it’s worth it
For everyone who values the clearest, most unadulterated flavor possible. The difference is especially noticeable at lower temperatures, where delicate aromas come to the fore.
Care
Much easier to clean than plastic: soak in isopropyl alcohol, rinse, dry. Glass does not absorb odors.
Disadvantage
Fragile. If you use the device a lot on the go, you should combine it with a dust cap and case.
Bubbler for ÄRiS (Ultra)
Comfort & upgrade
Function
Water cooling made of borosilicate glass. The vapor bubbles through water, cooling down in the process and trapping some of the particles. Sometimes also called a "water filter" – it’s the same part.
Why it’s worth it
Especially if you like to vape at higher temperature ranges or have longer sessions. Otherwise, the vapor quickly becomes warm and harsh.
Usage
Use water sparingly: the inlet opening must be just covered, no more. Change water regularly, or the taste will change.
Attention
Bubblers are model-specific – the ÄRiS bubbler does not fit the FX Mini and vice versa.
Alternative
There are also bubbler adapters (10″, 14″, 18″, borosilicate glass) that let you connect the ÄRiS to your own glass – the better choice if you already have a bong.
ÄRiS (Ultra) mouthpiece set
Comfort & upgrade
Function
A complete set of mouthpiece base, glass mouthpiece, sealing ring, and sieve – carrier plus all wear parts in one.
When useful
As a replacement in case of loss or breakage of the mouthpiece, or if you want to refresh the entire mouthpiece area instead of buying individual parts.
Colors
Available in matching variants – including black, gunmetal, and night blue, coordinated with the device colors.
Calculation example
If the sealing ring and sieve are due anyway and the glass mouthpiece has scratches, the set is usually the more sensible choice than ordering three individual parts.
ÄRiS (Ultra) dust cap
Comfort & upgrade
Function
Silicone cap that seals the mouthpiece during transport and protects the vapor path from dust, lint, and crumbs.
Why it’s worth it
Especially when the device lies loose in your bag, dirt quickly collects in the open mouthpiece – which goes directly into the airway on the next draw.
As a replacement
Caps are small and easily lost. Usually available in sets of three, so you don’t have to reorder immediately if you lose one.
Our recommendation for the ÄRiS setup:
As a base: spiral sieve insert and sealing rings with spare sieve.
Very helpful: air channel tool and cleaning brushes – without them, it’s hardly possible to access the air channel properly.
If you like: glass mouthpiece, bubbler, dosing capsules (the same as for the FX Mini).
As a base: spiral sieve insert and sealing rings with spare sieve.
Very helpful: air channel tool and cleaning brushes – without them, it’s hardly possible to access the air channel properly.
If you like: glass mouthpiece, bubbler, dosing capsules (the same as for the FX Mini).
4) Accessories for the Wolkenkraft LIVE
The Wolkenkraft LIVE is the flagship – with the most extensive but also the most complex accessory system. The device is modular: mouthpiece base, filter module, titanium chamber, and several locking rings interlock. Those who understand the system can selectively refresh individual parts instead of replacing expensive assemblies entirely.
Important: Filter ≠ Filter Module
Most wrong purchases happen here. The Coolscreen Filter is the filter element – the actual wear part you regularly refresh. The Coolscreen Filter Module is the complete filter unit, the entire assembly. Both are explained individually below.
Most wrong purchases happen here. The Coolscreen Filter is the filter element – the actual wear part you regularly refresh. The Coolscreen Filter Module is the complete filter unit, the entire assembly. Both are explained individually below.
LIVE Coolscreen Filter
Wear part
Function
The filter element itself – the actual wear part in the LIVE system. It traps particles and cools the vapor on the way to the mouthpiece.
Replace
If you have to draw harder than before or vapor production decreases even though the chamber is clean. This is the classic sign of a clogged filter element – often mistakenly attributed to the heating.
Usage
Knock out or brush off, soak if heavily soiled, and let dry completely. If cleaning no longer restores airflow, it is worn out.
Our tip
This is the part that wears out fastest on the LIVE. A replacement costs just a few euros and immediately restores the device to factory feel – we recommend keeping one ready.
LIVE Coolscreen Filter Module
Comfort & upgrade
Function
The complete filter unit – that is, the assembly into which the filter element is inserted. Not to be confused with the filter itself.
When useful
Two cases: as replacement in case of damage, or – much more often – as a second module for swapping.
The Trick
Keep a second module ready. Instead of cleaning on the go, simply swap the entire module and you’re ready to go immediately. Then do the basic cleaning calmly at home. For heavy users, probably the biggest convenience gain in all LIVE accessories.
Mnemonic
Filter = wear part that you replace regularly. Module = assembly that you usually only need once.
LIVE Seal Ring Set
Wear part
Function
In the modular LIVE, multiple seals ensure that the individual assemblies fit together airtight. This set bundles them.
Replace
If parts feel loose, no longer close cleanly, or the draw seems "leaky." A modular system has more joints than a one-piece device – and each can draw in air incorrectly.
Usage
Remove old seals, briefly clean the seating surfaces, and install new rings flush. Residues on the sealing surface otherwise prevent the new ring from sealing properly.
Our tip
Rubber hardens slowly from heat – you don’t notice it from one day to the next, but as a gradual loss of performance. A replacement set prevents this cause.
LIVE mouthpiece locking ring
Wear part
Function
Keeps the mouthpiece firmly in place and ensures a defined fit on the mouthpiece base.
Replace
If the mouthpiece no longer fits firmly, twists, or has noticeable play. A stretched locking ring also means the seal underneath is no longer pressed properly – so the draw suffers doubly.
Our tip
Small part with a big effect: if it doesn’t sit properly, the entire mouthpiece area no longer functions cleanly. For heavy users, having a spare in the drawer is worthwhile.
LIVE chamber locking ring
Wear part
Function
The counterpart on the chamber side. Together with the mouthpiece locking ring, it reliably holds the modular system together.
Replace
If the chamber no longer closes cleanly or wobbles when assembled. Since this ring sits directly on the hot chamber, it is thermally more stressed than the ring on the mouthpiece.
Our tip
Precisely because it is exposed to higher temperatures, it ages faster than other small parts – keep this in mind when ordering replacements.
LIVE titanium chamber
Comfort & upgrade
Function
The filling chamber made of titanium – heat-resistant, flavor-neutral, and very durable. This is where your material goes.
Two variants
They come for herbs and for resin. When buying replacements, pay close attention to which one you need – the versions are designed for different consistencies.
When useful
As a replacement in case of damage or as a second chamber: clean one while continuing to vape with the other. Also practical if you want to keep different materials separate so the flavors don’t mix.
Care
Titanium tolerates iso-alcohol without any problems. Let it dry completely before reinserting.
LIVE Multi Tool
Tools & Care
Function
Tools for disassembling and assembling the LIVE components – for locking rings, filter module, and chamber.
Why important
In the modular design of the LIVE, several parts fit tightly together. Without the right tools, opening it becomes fiddly – and improvising can easily damage sealing surfaces or threads.
Practical use
What is tedious is done less often. With the right tools, disassembly for cleaning takes less than a minute – and that’s exactly why maintenance then becomes routine.
When useful
As a replacement for loss or if you want a second set for on the go.
LIVE Multi Key
Tools & Care
Function
The compact alternative to the multi tool – performs the same function for opening and closing assemblies, just in a smaller form.
Why it’s worth it
Small enough to always have with you. If the filter module clogs on the go, you can change it immediately instead of waiting until you get home.
Multi Tool or Multi Key?
The multi tool is enough for home. If you carry the device a lot, the Multi Key is better – or have both, one for each place.
LIVE Cleaning Brush
Tools & Care
Function
Brush for the chamber, air channel, and mouthpiece area of the LIVE.
Routine
Brush out briefly after the session while the device is still warm to the touch – residues loosen much more easily then. Cold and hardened residues quickly become a fiddly job.
Why important
Regular brushing noticeably extends the lifespan of filters and seals. You spend just a few seconds and replace wear parts less often.
Our tip
One is enough, it lasts a long time – but without it, the basic tool for every cleaning is simply missing.
LIVE Ceramic Mouthpiece
Comfort & upgrade
Function
The ceramic mouthpiece – flavor-neutral, heat-resistant, and pleasant on the lips.
Why it’s worth it
The affordable and usually more sensible alternative to the complete mouthpiece base. When the taste fades and cleaning no longer helps, this part is usually the cause.
When useful
As a replacement for breakage or loss – or as a refresh if residues have built up on the old mouthpiece after long use.
Care
Soak in isopropyl alcohol, rinse, let dry completely. Ceramic does not absorb odors.
LIVE Mouthpiece Base
Comfort & upgrade
Function
The complete mouthpiece unit – the carrier on which the ceramic mouthpiece, closure ring, and filter module sit.
Scope
They are also available as a Full Mouthpiece Set. Its contents explain the price: mouthpiece base, ceramic mouthpiece, closure ring with screen, COOLSCREEN® filter module and COOLSCREEN® filter.
When useful
As a replacement for real damage or if you want to renew the entire mouthpiece area at once – for example after very long use.
Check first
If only the taste suffers or the draw is difficult, you don’t need this. Almost always a new filter or a fresh ceramic mouthpiece for a few euros is enough.
LIVE Dosing Capsules
Comfort & upgrade
Function
LIVE-specific stainless steel capsules for pre-filling. Not identical to the capsules for FX Mini and ÄRiS – those don’t fit here.
Why it’s worth it
Prepare, insert, swap on the go. Saves time and keeps the titanium chamber cleaner because the material stays in the capsule.
Usage
Fill loosely instead of packing tight – overly packed material slows airflow and causes uneven vaporization. Remove and tap out after the session.
Combination
Together with a second titanium chamber and the capsule holder, the LIVE becomes a very relaxed device for on the go.
LIVE dosing capsule holder
Comfort & upgrade
Function
Transport container for pre-filled LIVE capsules that you can hang on your keychain or bag.
Why it’s worth it
Loose capsules in the bag open and lose their contents. The holder keeps them closed and ready to use – so you always have a dose on the go without extra effort.
Practical use
Two filled capsules in the holder cover a normal day without needing to carry a jar or grinder.
LIVE carrying case
Comfort & upgrade
Function
Protective case for device and accessories.
Why it’s worth it
The LIVE consists of many individual parts – filter module, chamber, sealing rings, tools, capsules. Without a fixed place, these small parts get scattered across drawers and bags, and eventually, the exact part you need is missing.
Side effect
An organized setup ensures maintenance becomes routine: when brush and spare filters are in one place, you clean more regularly.
On the go
Also protects glass and ceramic parts from shocks – the most fragile components in the system.
Our recommendation for the LIVE setup:
As a base: Coolscreen filter (the element, not the module) as a spare, plus the seal ring set.
Very helpful: Multi Tool or Multi Key plus cleaning brush – with the modular design, this makes maintenance much easier.
For heavy users: a second filter module and a second titanium chamber for quick swapping.
As a base: Coolscreen filter (the element, not the module) as a spare, plus the seal ring set.
Very helpful: Multi Tool or Multi Key plus cleaning brush – with the modular design, this makes maintenance much easier.
For heavy users: a second filter module and a second titanium chamber for quick swapping.
More Wolkenkraft accessories you should know about
In addition to the parts described above, there are other accessories that can be useful in everyday life. Here’s a complete overview:
Cleaning & Care
- Cleaning sticks – for tight spots where brushes can’t reach.
- Alcohol-free cleaning wipes – handy on the go when you don’t have isopropyl alcohol with you. Usually available in packs of six.
- Tweezers – help remove screens, seals, and capsules without burning your fingers.
Filling & handling
- Herb leaf (filling aid) – a funnel aid for clean filling, 100% biodegradable. Anyone who has ever spilled half the load beside the chamber will appreciate its usefulness.
- Stirring rod – for stirring the material between draws. Especially with conductive devices, this ensures more even extraction.
Power
- Charging cable – in Micro-USB (FX Mini, ÄRiS) and USB-C (FX Mini Ultra, ViTA, LIVE), the latter also available as a premium version with 120 cm length.
Note: Not all of these parts are continuously listed with us. If you’re looking for something specific, check the Wolkenkraft accessory collection or ask us briefly – we’ll tell you what’s available.
Maintenance schedule: when each part is due
Instead of fixed intervals, we prefer to work with symptoms – because how quickly something wears out depends heavily on how often and at what temperature you vape. This table helps you assign a problem to the right part:
Our cleaning routine in 30 seconds: After the session, tap out the chamber while the device is still warm – this makes everything come loose more easily. Every few sessions, brush out the mouthpiece and screen. Better to do a little regularly than rarely thoroughly: if you invest 30 seconds every two weeks, you’ll never need a deep clean.
What fits multiple devices – and what doesn’t?
If you have more than one Wolkenkraft device or are considering a second, this overview is worth real money:
✓ Share accessories
- ÄRiS and ÄRiS Ultra – use exactly the same accessories
- ÄRiS series and FX Mini series – share mouthpiece screens, dosing capsules, and dosing capsule containers
✗ Warning, not compatible
- Sealing rings FX Mini ≠ FX Mini Ultra – two different items, look closely
- Bubblers are model-specific – the ÄRiS bubbler doesn’t fit the FX Mini and vice versa
- LIVE accessories are standalone – dosing capsules, filters and mouthpieces of the LIVE fit no other model
- ViTA parts are ViTA-specific – own screens and a separate ceramic filter
- Charging cable: FX Mini and ÄRiS use Micro-USB, FX Mini Ultra, ViTA and LIVE use USB-C
Overview: Accessories by device
Everything at a glance – on the left the parts that wear out over time, on the right what makes everyday life more pleasant:
Conclusion: what you should start with
If you’re just setting up your Wolkenkraft setup, you don’t need everything at once. This order gives the greatest effect for the money: First, a small stock of screens and the matching seal for your model – this keeps the airflow clear and is the most common reason for declining performance. Then appropriate cleaning tools, because what’s easy to do, you do regularly. And only after that the comfort accessories: dosing capsules if you’re often on the go, a glass mouthpiece if taste is especially important to you, a bubbler if the vapor is often too warm for you.
The most important point at the end: Always pay attention to your exact model. Especially with FX Mini and FX Mini Ultra, the sealing rings are different, and LIVE accessories don’t fit any other device. If you’re unsure, just write to us which Wolkenkraft Vaporizer you use – we’ll tell you which parts fit.
In short: It’s worth refreshing wear parts before nothing works anymore. A screen for a few euros often does more than any temperature increase – because the airflow works freely again.
Assortment and versions may change. You can find the current delivery contents on the product page – and if you’re unsure which part fits your device, just contact us.
