XMax Glass Bubbler – Water Filtration for V3 Pro and V4 Pro
The glass bubbler for the XMax V3 Pro and V4 Pro replaces the mouthpiece and noticeably cools the vapor through water filtration. The result is significantly smoother, purer vapor – the matching adapter is included.
How to Use It in Three Steps
Using it could not be easier: fill the bubbler with water, replace the device’s mouthpiece with the bubbler – and enjoy cool, filtered vapor. After your session, simply empty the glass and clean it.
What Water Filtration Does
The vapor is cooled immediately as it passes through the water and is freed from possible impurities. For you, this means a noticeably smoother draw that remains pleasant even at higher temperature settings. Anyone who vapes heavily will notice the difference right away.
Important Safety Information
Vaporizer are electronic devices and must not come into contact with water. Therefore, please note:
- Do not fill in too much water – a small amount is sufficient for cooling.
- Do not hold the bubbler at too steep an angle, so that no water spills out.
- Before attaching it, check that the glass joint is dry and that no water can run into the device or heating chamber.
These three points are easy to remember – and can save you from ending up with a damaged device.
Glass Is Easy to Clean
The glass component can be easily emptied and cleaned after use. With glass, you can also immediately see when cleaning is needed – and residue adheres less strongly than it does to rough surfaces. Change the water every session to keep the flavor fresh.
Our Practical Tip
Only fill the bubbler with enough water for the filtration to work properly – more water does not provide better cooling but increases the risk of drawing in water. Set the device down upright between draws instead of leaving it on its side. After cleaning, allow the glass joint to dry completely before attaching the bubbler again.
Conclusion
The glass bubbler is the accessory with the greatest noticeable effect for your V3 Pro or V4 Pro. Fill it with water, attach it, draw – and the vapor arrives significantly cooler and smoother. The adapter is already included.
Scope of Delivery
- 1 x XMax V3 Pro | V4 Pro Glass Bubbler
- 1 x XMax V3 Pro | V4 Pro Bubbler Adapter
Manufacturer
Manufacturer: Shenzhen Topgreen Technology Co., Ltd., Minkang Road 207, Guangdong, Shenzhen, China, 518110, info@topgreencig.com, https://www.topgreen-tech.com/
Importer / Distributor: Reinhart GmbH & Co.KG, Tempelhofer Straße 21, 52068 Aachen, Germany, https://reinh.art/, info@reinhart.shop






